树莓派2 安装freebsd11

1、下载镜像并安装

https://wiki.freebsd.org/FreeBSD/arm/Raspberry%20Pi
http://raspbsd.org/raspberrypi.html

写入SD卡即可

2、freebsd基础配置

http://www.bigsea.com.cn/archives/1393/
1、使用root账号ssh登陆

ee /etc/ssh/sshd_config
加入
PermitRootLogin yes

2、设置静态路由

ee /etc/rc.conf
ifconfig_ue0=”inet 192.168.3.22 netmask 255.255.255.0”
defaultrouter=”192.168.3.1”

3、设置时间

cp /usr/share/zoneinfo/Asia/Shanghai /etc/localtime
echo ‘ntpd_enable=”YES”‘ >> /etc/rc.conf
service ntpd start

4、设置swap分区

dd if=/dev/zero of=/usr/swap0 bs=1m count=128
chmod 0600 /usr/swap0
echo ‘md99 none swap sw,file=/usr/swap0 0 0’ >> /etc/fstab
swapon -aq

5、安装pkg install   (万年Operation timed out，没成功过T_T)

1. First install pkg by pkg-static.
    # fetch http://www.peach.ne.jp/archives/rpi/ports/rpi2/pkg-static
    # chmod 755 pkg-static
    # ./pkg-static add http://www.peach.ne.jp/archives/rpi/ports/rpi2/pkg.txz

2. Disable default repo by FreeBSD.conf.
    # mkdir -p /usr/local/etc/pkg/repos
    # echo “FreeBSD: { enabled: no }” > /usr/local/etc/pkg/repos/FreeBSD.conf

3. Install following rpi2.conf:
    # fetch http://www.peach.ne.jp/archives/rpi/rpi2.conf
    # mv rpi2.conf /usr/local/etc/pkg/repos
    # pkg update

用host -t srv _http._tcp.pkg.freebsd.org 得到的地址更新也是莫有用